Molded Rubber Parts suppliers Raw Material
Our Rubber Cap For Pipe compound from world class suppliers or domestic rubber supplier and customized pantone code is available, hardness from 30 to 90 Shore A.
Size
Standard size with our current mold or customized according to your sample or drawing( 2D, 3D drawing , format STP, DWG, PDF , etc)
Quality and Certificate
We execute ISO9001 quality system and our Rubber Cap For Pipe has passed ROHS/Reach/WARS certificate.
Mold and tooling
In house tool making and free of tooling charge for standard rubber cap, the mould parting line will be sent to customer confirmation.
Management and quality tracking: Strict material traceability under ERP system.
Rubber Cap For Pipe process flow
PO confirm---Develop mold according to drawing or sample---Develop chemical formula according to specifications---Mix the raw material as per formula---Prepare and Install the mold on the machine---Preform the rubber compound---Put the compound into mold and vulcanization with certain temperature and pressure---After a while, remove the goods from the mold---Trimming the flash---Inspection---Packing---Shipping
Small MOQ:Have variety Rubber Cap For Pipe in stock, so mini MOQ is acceptable.
Function: protect and seal.
Payment: T/T, L/C, Credit card. USD, RMB ,Euro and so on other currency is available.
Trade Term: EXW, FOB, CIF etc
Package: poly bag and carton(40*32*25CM). If you need pack by pallet or other customized package, it鈥檚 also ok.
Shipping method: By air, by sea, by express, multi-modal transport
Test methods for rubber products
Shore A hardness was measured according to DIN 53505
This method, invented by Albert F. Shore in the 1920s, is by far the most widely used method for measuring elastic colloids.
The surface of the detector must be flat and parallel. The test number is read after a 3-second stay. Therefore, the measurement of Shaw A is basically used in material development and release of formula raw materials. For tangible materials, this method can only be used if it has sufficient thickness and a flat surface. Shaw A is suitable for hardness measurements from 10 to 90. Hardness above 90 must be measured by Shaw D method. It is not suitable for hardness measurement of elastic colloid.
Hardness testing instrument
- Hardness testing equipment must meet the following requirements, must be marked with Shore A or Shore D hardness tester, also marked with the manufacturer's identification and production number.
- The scale partition value must have hardness units and the scale spacing must be 鈮?mm.
- The shape and size of the extruder and the surface of the bracket must conform to Figure 1.
- The elastic value of the tester is calculated by applying forces to the extruded body, which are generated by the weight.
The theoretical values of elasticity are listed in Table 1, and 5mN is selected.
- Shaw A and Shaw D hardness testers allow tolerances of 卤1. Instruments for internal use should be constantly monitored by the user. When used to detect binding data (e.g. acceptance tests, etc.), the tester must be tested annually by an official testing authority in accordance with DIN51220.
The measurement of body
Shape
The diameter of the test area must be 鈮?5mm, and it must be smooth and flat. The surface of the measuring body must be coated with talcum powder when testing Shore A hardness. The thickness of the measured body must be 鈮?mm
Measurement of hardness
Hardness is one of the important parameters in rubber technology. Freudenberg Process Seals, Germany, defines the standard hardness of all elastomer materials (e.g. 70EPDM 291). There are many different standard methods of measuring hardness. But always to measure how deep a fixed detector can squeeze into the colloid with a given force.
Products Description
Our Factory
Product Application
Pump
Pipe
Food industry
Water treatment
Medical devices
Chemical industry
Electric appliances
Hydraulic and pneumatic
Oil and gas
Aerospace
Agriculture
Auto industry
Mechanical automation
Mining聽
New energy
Shipbuilding
Our Certificate
Molded Rubber Parts suppliers
website:http://www.hskseal.com/molded-rubber-parts/